Nokta detectors Golden King NGR - Manual (Page 10)

Starting
Assembly
After the battery is taken out of the bag, it is installed in its
place on the system box by the connection screws.
The extension bar to which the armlet and the joystick are connected
is removed from the bag. The search coil is attached to the bobbin
connection component on the extension bar with the bobbin clamping
screws. The connector at the end of the extension bar is inserted in its
place on the search coil and the connector next to the armlet is inserted
in its place on the system box.
Connector Armlet
Joystick
Connector Search coil
System Box
After completion of these steps, adjust the length of the detection
system to your height by using the sleeves on the extension bar.
Now the system is ready for use.
4