Diamond Products FZ-2ST - Manual (Page 8)

1.3 During sawing
Use only the screws specified for this purpose
and meeting the prescribed length and quality
requirements!
Never use saw blades with cracks! Cracked
saw blades can brake during sawing and en-
danger people.
Power feed
Machines with power feed are not automatic
machines. They have to be observed during
machining. An emergency stop must be feas-
able at any time.
Rotating and moving parts
To prevent of being caught by rotating or mo-
ving parts wear tight-fitting clothes and a hear-
net in the case of long hear!
1.4 After machining
Electric power units
Unplug the mains right after machining in or-
der to prevent unintentional switching-on of
the power unit!
Removing cutouts and drilling cores
Use appropriate lifting gear in order to prevent
injuries!
Thsr‡’Ãv†‡ ˆp‡v‚† Aa!T
Page 8 FZ_29811