DefenderWorx Mustang Locking Fuel Doors User Manual
Page 4
Step 6 B:
Note the image now showing the U
Clips installed. These slide right
into the factory locations and are
now ready to receive the fuel door
bolts and secure it to the vehicle.
Step 7:
Install your Defenderworx fuel
door. The arrows show the 3
locations that will be physically
attached to the body of the car.
We have supplied 2 washers
that will act as shims if your
door is not sitting flush with the
body.
Step 8:
Snug up your allen bolts,
remove the tape and clean up
your work area. Close the
door, lock it, and enjoy your
newest addtion to your Pony!
Thank you for choosing a
Genuine Licensed
Defenderworx product!