DefenderWorx H2 ROOF RACK END CAPS User Manual
DefenderWorx Accessories communication
H2PPC04015 / H2PDC04015 ROOF RACK END CAPS
INSTALLATION INSTRUCTIONS
Use key to remove caps. Remove lock by depressing brass locking ring located on the inside of cap.
Place the lock in the new end cap by inserting it from the front side while pressing the brass lock
ring so as to allow it to go through the hole. (The key must be in the lock during the assembly).
Reinstall cap on the roof rack.
Defenderworx, Inc.
1120 North Armando Avenue
Anaheim, CA 92806
(714) 630-9700 Phone
(714) 630-9701 FAX