Multichannel Systems USB-MEA32-STIM4 Manual - Manual (Page 31)

Recording and Stimulation
25
Operating more than one USB-MEA32-STIM4-System with multiple instances of MC_Rack
Using USB-MEA32-STIM4-Systems, it is possible to operate up to four devices with one instance
of MC_Rack for each device on a single data acquisition computer.
Click "Advanced Configuration" in Edit menu to select the number of instances of MC_Rack
that you want to run simultaneously. Please see the following screen shot.
1. Start the first instance of MC_Rack.
2. Click Data Source Setup on the Edit menu. All connected devices should become available
in the Data Source with different serial numbers. Select the device you want to control with
the first instance of MC_Rack via serial number.
3. Adjust the settings as described above.
4. Start the second instance of MC_Rack.
5. In the "Data Source", select a device with a different serial number and repeat the process
described above.