Multichannel Systems USB-MEA32-STIM4 Manual - Manual (Page 20)

USB-MEA32-STIM4 Manual
14
4.3 The USB-MEA32-STIM4 Device
4.3.1 Front
Unit for pMEA with Suction Port
The perspex insert in front of the main unit contains the frame for the pMEA on top and the
suction port below. A tube is connected to the small sealed compartment. By this tube, suction
can be applied to the MEA from below either manually via syringe, or via controlled vacuum
pump CVP.
Holding Clamps
To open the unit unlock the holding clamps on the left and on the right. The upper part
of the unit swings open.