MIDLAND BT City - Manual (Page 22)

6
Rejecting a call
If you don’t wish to answer, you can let the mobile phone ring or press
the “Control” button for a few seconds (you will hear one audio con-
firmation tone).
Making a call
There are several ways to make a call.
From the mobile keypad:
› Dial the number on the mobile keypad:
› Press “Send” on the mobile phone.
To redial the last number:
› Press and hold “Control” button for 3 seconds in order to redial the
last number (you will hear one audio confirmation tone).
To make a voice call:
› Briefly press “Control” button. If your mobile phone supports voice
calls, you will be asked to speak the name of the contact you wish
to call.
Priority: Calls have a high priority, which means that all other commu-
nications are temporarily disabled when a call arrives and automatically
re-enabled once the call ends.
Attention: the voice call command is possible only if the BTCity/
BTEva has never been connected to another BTCity/BTEva for
Intercom communication.
Ending a call
There are several ways to end a call:
› Wait for the called person to end the call.
› Press the “Control” button for 3 seconds (you will hear an audio
confirmation tone).
› Press “End” button on the mobile phone.
Using the MP3 player feature of the mobile phone
Many mobile phones are now designed to be used as stereo MP3
players. The BTCity/BTEva device fully supports the A2DP and AVRCP
protocols that enable you to listen to stereo music and remotely con-
trol your mobile phone’s MP3 player. You can even use the buttons
on the BTCity/BTEva unit to control the following play options: Play,
Pause, Forward and Backward.
Available controls:
› To play/pause music: double click the “Control” button.
› To skip forward to the next song: keep pressed the “Volume+”
button.
› To skip backwards to the previous song: keep pressed the
“volume-“ button.
› To enable your connected MP3 Player (ADP/AVRCP): press
and hold down the “Volume +” and “Volume-“ buttons for 3 se-
conds (this feature is active by default).
› To disable the MP3 player: press and hold down the ”Volume+”
and “volume-“ buttons (2 beeps will confirm it).
Priority: the music listening mode has the lowest priority. Therefore, it
will always be disabled when another type of communication is ena-
bled.
Pairing the unit with a GPS Sat-Nav
It is generally possible to pair the BTCity/BTEva unit with all GPS Sat-
Navs that support Bluetooth earpieces.
Midland BTCity/BTEva has been successfully tested for use with GPS
ZUMO Sat-Navs manufactured by Garmin and TOMTOM Rider 1 and
2 Sat-Navs.
Volume+
forward
Volume -
backward
Control
Pause/Play