Morris Metal Flexible Hose - Manual (Page 2)

Morris Metal Flexible Hose
continued
16
Metal Smooth-Bore Flex Hose
This smooth-bore hose is ideally suited for dry-bulk pneumatic
conveying. This hose is produced with a durable outer armor
and a highly abrasion-resistant liner. A precision manufacturing
process makes this hose unequaled in strength and flexibility.
Pressure and vacuum capabilities may be easily enhanced
by the selection of an appropriate packing material.
The smooth-bore hose is available in various alloys, metal
strip thicknesses, and in diameters from 1-1/2" through
8" I.D. Smooth bore hose is available in any length and
can be provided in bulk or fabricated assemblies.
C
NOTE: Other diameters are available on request.
Packings Available For Increased Pressure and
Vacuum Capabilities
Packing Type Features Max. Temp.
Cotton Most Economical Packing 180°F
Elastomeric
Provides Maximum Pressure
200°F
and Vacuum Capability
Copper For High Temperatures 800°F
High Temperature Specially Coated High
1,000°F
Fiber Temperature Filament
Stainless Steel For Extreme Temperatures 1,200°F
Morris Material Codes
Armor Materials: Liner Materials:
A – Aluminum (unpacked only) S – T301 Stainless Steel
G – Galvanized Steel 4 – T410 Stainless Steel
S – T304 Stainless Steel C – Carbon Steel
6 – T316 Stainless Steel
Technical data is meant to be used as a guide. If more specific
information is required, please contact the factory.
Morris Custom-Fabricated
Interlocked Hose Assemblies
State-of-the-art fabricating methods, combined with an
extensive selection of Morris Ever-Tite
® couplings, enable
Morris to effectively supply any configuration of hose
assemblies.
Typical end fittings include cam and groove connectors,
pipe and tube nipples, flanges and hose shank adapters.
Maximum Fabrication Maximum
Steel Type Temperature Technique Temperature
Stainless Steel 1,750°F Welding 1,200°F
Carbon Steel 850°F Brazing 700°F
Galvanized Steel 450°F Epoxy 250°F
Maximum Steel and Fabrication Temperatures
Note: Epoxy may be used with all metal types.
However, applications are limited to 250°F service.
Packed Unpacked
PACKING
LINER ARMOR
FLOW
LINER ARMOR
FLOW
Strip Thickness
15 18 25 A 20
Material Code Material Code Material Code Material Code
G, S / C, S, 4 G, S, 6 / C, S, 4 G, S / C, S A / S
Weight Min. Weight Min. Weight Min. Weight Min.
Inside Per Bend Per Bend Per Bend Per Bend
Dia. Foot Radius Foot Radius Foot Radius Foot Radius
(In.) (Lbs.) (In.) (Lbs.) (In.) (Lbs.) (In.) (Lbs.) (In.)
1-1/2 1.2 7 1.3 8
2 1.6 9 1.7 10
2-1/2 1.9 11 2.2 12
3 2.3 13 2.6 14 3.2 18
3-1/2 2.6 15 3.0 16 3.7 21
4 3.0 17 3.4 18 4.2 23 2.1 23
4-1/2 3.4 19 3.8 21 4.7 26 2.3 26
5 3.7 21 4.2 23 5.2 29 2.6 29
6 4.5 25 5.0 27 6.2 34 3.1 34
7 5.2 29 5.8 32 7.2 40 3.6 40
8 5.9 33 6.6 36 8.2 45 4.1 45