Mobi Technologies 70120 DualScan ULTRA - Manual (Page 10)

To retrieve Readings from the Memory
Press and release the SET Button to retrieve the most recent reading recorded
in the Memory. It will show the Body Temperature, the Type of Reading (ear or
forehead), the Fever/No Fever colored light, the Date it was recorded, and the
Memory Number (highest number in memory).
To retieve further readings from
the memory just keep pressing the
SET Button. As you do so the next
previous reading records will
appear in sequence from latest to
oldest as the Memory Number
displayed goes down.
You can stop on any previous read-
ing and press the TALK Button to
hear the reading spoken (if Taking
Feature has not been disabled).
To change Settings
Set-up Mode is entered when you press and hold the
SET Button for 2 seconds. The word SET will appear on
the display. Then you can reset the unit.
10
Set-up Mode
Memory Mode
(no previous recorded
readings in memory)
Memory Mode
(No.18 of previous
recorded readings)
To reset current Time and Date
Once the word SET is shown, use theTALK button to go
through to the Year, Month, Hour, Minute, etc. To change
one of those, stop on it, and then use the SET Button again,
which will cycle through the date/time values so you can
stop on the date/time number you need to set it to.