Minuteman H20 Walk-Behind Scrubber Disc Brush Drive - Manual (Page 28)

28
Machine Operation
To Turn on Machine:
Turn key to operate position ( I )
To Turn on Vacuum:
Lower squeegee into operate position, vacuum motor will turn on automatically.
To Turn on Brush Motor:
Move brush lift pedal from the “home” (down) position to the operating position (up). Depress the operator bail handle.
Brush motor will turn on and assist to propel the machine forward.
To Turn on Cleaning Solution:
Move solution lever from closed (down) position up to the desired flow position.
To Charge Batteries:
When the battery status indicator reaches the red zone the batteries need to be recharged. Take the machine to a well
ventilated area, unwind the battery charger power cord from the electrical box cover and plug into an appropriate power
source. After approximately 10 seconds the battery charge status indicator will turn on. Be sure to check the battery water
levels as recommended.
WARNING: Charging batteries generates explosive gasses. Do not charge batteries when open flames or sparks
are present. Do not smoke. Charge the batteries in a well-ventilated area .
NOTE: When you no longer want solution or stop the machine for an extended period of time, you must
move the solution lever back to the closed (down) position. Otherwise, solution will continue to flow
onto the floor.