Micromod MOD: 1750N Output holder for MOD 30ML - Manual (Page 37)

Output Holder Instructions
OPERATION AND MAINTAINANCE
5.2.2 CONTROL KEYS
The operator control keys are:
Used to ramp up the output holder’s output when the controller
output is not valid.
Used to ramp down the output holder’s output when the
controller is not valid.
5.2.3 BAR DISPLAY
The 10 segment horizontal bar graph provides visual indication of the output holder’s output.
Each segment represents up to 10 % of the output. The segment’s light intensity varies as
the value changes from minimum to maximum of the value it represents.
5.2.2 UP /DOWN KEY OPERATION
Press the UP key or DOWN key to manipulate the output. Pressing and holding the key will
make the rate of ramping faster.
5 -2