Meriam M1 – Series Digital Manometer - Manual (Page 9)

M1 Series - DM Instruction Manual 9R000034-IR
E.O. 6409 JAN 2008
www.meriam.com
Page 9 of 17
REC View:
First, set the M1 to NORMAL mode (no functional mode icons on).
Then enter REC View mode by pressing both the B and U keys
until the REC icon illuminates.
Second, press the U key to cycle through the stored values. The
pressure value on the LCD will blank briefly every time a sample
is displayed, and after all the recorded samples have been viewed,
“----” will be displayed and the following step (stop and exit REC
View mode) will happen automatically.
Third, to stop and exit REC View mode, press both the B and U
keys. The M1 will return to NORMAL mode (the REC icon will
go off). This step can be done anytime the REC icon is on.
Auto Shut-Off
To conserve battery life, the M1 will automatically power off after
30 minutes of keypad inactivity.