Meriam MFC5150 HART Communicator Manual - Manual (Page 40)

34
5.0 Updating Software
System requirement:
The update software requires a Microsoft Windows computer running a supported Windows operating
system.
For software requirements and updating details go to:
http://www.5150update.com/MFC5150 Update Procedure.pdf
6.0 HAZARDOUS AREA USE
Intrinsically Safe Operation
The 5150X HART
® Communicator includes certification for Intrinsically Safe operation. Refer to the
Intrinsic Safety Control Drawing in the Appendix of this manual for more information. The following table
identifies model numbers and areas of acceptable use.
Model Number Use Description Non-hazardous Area Hazardous Area
MFC5150 General Purpose √ NO
MFC5150x Intrinsically Safe √ √
Units with Intrinsically Safe certification can be identified by model number or by a special name plate on
rear of the unit. An example of the Intrinsically Safe name plate is shown below for reference.