Meriam MFC5150 HART Communicator Manual - Manual (Page 25)

19
Language
Selecting this icon allows the user to change the language that will be used for System
menus, system messages and HART ® menus (if supported by the manufacturer DD). When the icon is
selected a list of supported languages is displayed:
Select desired language by using the Arrow Keys or touching the appropriate line. Finalize your selection
by pressing the Accept icon, or the Accept key (࿌) below the alpha keyboard. Cancel this operation by
pressing the Cancel Icon, or the Cancel key (࿋
࿋ ࿋ ࿋) located below the alpha
keyboard.
System screen labels are static and will not change language until the next time a page is entered.
This applies to the main system screen label also. It will not change language until the
communicator power is cycled.
HART ® screens change language when a new connection is
established and only if the language is supported by the device description files. The connected
device indicated by the green connection bar, will continue to display the previously active
language until a new connection is made.
User defined text fields (such as HART ® parameters like Tag and Long Tag, file names, and
shortcut labels) do not support multiple languages.
Touch Screen Calibration
Selecting this icon will display a standard touch screen calibration screen. By the user
touching the cross when and where directed, the touch screen will be recalibrated.