MaxPower Corp GE VH Series - Manual (Page 4)

Modifications reserved Page 4/5
TDS_VHE_XXX_0K7_2K0_XGB.doc Technical Data Sheets VH700-2000VA UL
Controls, signals and alarms
Front panel details Rear panel details
On / Off Push – buttons
UPS ON/standby LED
On Bypass LED
On Battery LED
Alarm LED (red)
Runtime LED bar
Load level LED bar
Front panel
Input thermal circuit breaker
Input / Output sockets
DC connector for batteries
Remote External Power Off Contacts (REPO)
USB interface card
USB/RS232/Relay Card *
SNMP Card*
*option
Rear panel
2000VA
1500VA
1000VA
700VA
Optional features
SNMP interface card
An SNMP interface adapter can be placed in the SNMP slot in the rear panel of the UPS, which allows the data
interface to be connected directly to an Ethernet or Web.
USB/RS232/Relay Card
The card is provided with an USB connector, a 9-pole sub-D connector and four potential free
changeover contacts, representing: mains failure, general alarm, battery low and bypass active.
Battery modules – extended runtime
Additional battery modules (up to 3) may be connected in parallel to in order to achieve a longer runtime. Every battery
module is equipped with its DC cabling and it makes connection between modules very easy and simple.
Increasing of total battery capacity will correspond to a longer recharging time.