Allied Telesis AR300 series - Manual (Page 28)

28 Release Note
Software Release 2.3.1
C613-10325-00 REV B
Border Gateway Protocol 4 (BGP-4)
The Border Gateway Protocol version 4 (BGP-4) is an external gateway protocol
which allows two routers in different routing domains to exchange routing
information. Software release 2.3.1 supports phase one implementation of
BGPv4 on AR700 Series routers, Rapier Series Layer 3 Switches, and AR800
Series Modular Switching Routers. BGP-4 is not available on AR300 Series
routers.
The available commands are:
■ ADD BGP AGGREGATE
■ ADD BGP CONFEDERATIONPEER
■ ADD BGP IMPORT
■ ADD BGP NETWORK
■ ADD BGP PEER
■ DELETE BGP AGGREGATE
■ DELETE BGP CONFEDERATIONPEER
■ DELETE BGP IMPORT
■ DELETE BGP NETWORK
■ DELETE BGP PEER
■ DISABLE BGP DEBUG
■ DISABLE BGP PEER
■ ENABLE BGP DEBUG
■ ENABLE BGP PEER
■ RESET BGP PEER
■ SET BGP
■ SET BGP AGGREGATE
■ SET BGP IMPORT
■ SET BGP PEER
■ SHOW BGP
■ SHOW BGP AGGREGATE
■ SHOW BGP CONFEDERATION
■ SHOW BGP IMPORT
■ SHOW BGP NETWORK
■ SHOW BGP PEER
■ SHOW BGP ROUTE
For more information, see the Border Gateway Protocol version 4 (BGP-4) chapter
of your switch or router’s Software Reference. The latest Software Reference
can be downloaded from the support site at
www.alliedtelesyn.co.nz/
documentation/documentation.html