Magnum Venus Plastech Pro Gun CPD_PRTM - 1:1 - Manual (Page 29)

1:1 Classic Pro Gun Manual
Rev. 05/2012 Page | 29
3. Install the proper Restrictor into the Hardener side of the gun block through the
side port.
4. Using a new Seal (02441-1) install the Plug / Screw (7102-5-6) into the side of
the mix chamber.
5. Install the Ball (03199) and Spring (04319) into the front ports of the mix chamber
6. Using a new Plug Seal (58695-1) install the Plug (58696-1) into the front of the
mix chamber on top of the spring.
Mix Housing Options

Mix Housing (58692-1)
– Use with all turbulent mixers and most
applications.

Mix Housing (DUO-4101)
– Use with disposable mixer
assemblies (07550 3/8 ID Disposable mixer or 07551 1/4 ID
Disposable mixer) for Pour or Spatter applications.

Ratio Housing (DUO-4201) – Use to separate the two streams
(Catalyst & Resin)
– Check ratios & recirculation.
Turbulent Mixer Selection
There are two different turbulent mixers, in two different materials.

Standard Turbulent Mixer 5107-27-3
– Use for most applications where
outputs are not critical. Use with chopper and saturator applications.

Critical Mix Turbulent Mixer 5107-27-2
– Use for low output applications such
as gel coat. In low flow application the critical mix turbulent mixer will work
best.

Glass Filled Critical Mix Turbulent Mixer 5107-27-5
– Use in low flow
applications where the material is abrasive and durability is required.