Magnum Venus Plastech Pro Gun CPD_PRTM - 1:1 - Manual (Page 27)

1:1 Classic Pro Gun Manual
Rev. 05/2012 Page | 27
Reassemble Flush Valve
FLUSH VALVE BODY -
AUTO/MANUAL
SPRING
SEAL
O-RING
O-RING
FLUSH SEAL BODY
FLUSH VALVE NECK
FLUSH VALVE BUTTON
SPLIT SEAL
FLUSH VALVE BODY
1. Place the o-ring (O-K-008) on the flush valve button (5104-25-1).
2. Insert the spring (9203-2-3) onto the flush valve button.
3. Push the button and spring into the flush valve body (5104-24-1).
4. Place the o-ring (O-A-007) on the flush seal body (5104-23-1).
5. Insert the flush seal body (5104-23-1) into the end of the flush valve body and
screw it onto the button.
6. Place a flush valve seal (5104-26-1) on the flush valve body.
7. Install the flush valve body (5104-24-1) into the flush valve neck (5104-22-1).
8. Install the split seal (5104-21-1) onto the flush valve body (5104-24-1).
Note: For systems without Auto/Manual flush assemblies skip steps 9 - 13