Magnum Venus Plastech Powerhead UPPH-10000 - Manual (Page 15)

UPPH–10000 Powerhead Manual
Rev. 05/2012 Page | 15
Introduction:
This manual covers the Ultra Proportioner version of the 10” diameter by 4” stroke
length air motors.
The reassembly will require the use of removable Loctite® or equivalent thread lock
compound, Lithium grease (Lubriplate 08465) and SUPERLUBE o-ring lubricant.
NOTE: Before starting any service work, release fluid and air pressure from
system. Remove the two air lines and valves attached to the Powerhead valve
block. The Powerhead assembly should be removed from the system for service
work and mounted in a vise by the Clevis.
Please read the manual carefully. Follow the steps in the order given, otherwise you
may damage the equipment or injure yourself.
During Disassembly . . .
As you disassemble the equipment, lay out the components in the correct order and
direction, and have all component drawings available to refer to prior to disassembly.
This will help you to reassemble them.