Magnum Venus Plastech System One FRP 3101-00-01 - Manual (Page 9)

FRP SystemOne
To Reinstall onto SystemOne Unit
1. Position the 8401-4-1 (Sleeve) over the Power Cylinder Piston
Shaft. Bring the Power Cylinder Piston Shaft down onto the top of
the 3101-8-1 (Piston Rod Adapter). Insert the two 8401-3-1 (Con-
nectors) and lower the 8401-4-1 (Sleeve). Install the 8401-5-1
(Ring) in machined groove.
2. Slide the end of the 4103-7-1 (Slide Arm) into the slot in the 3101-8-
1 (Piston Rod Adapter) and insert the 7203-8-1 (Quick Pin).
3. Fill the packing nut cavity 1/2 to 2/3 full with appropriate oil.