Lightronics SM192 User Manual
Page 6
INSTRUCTION MANUAL
Page 6 of 9
SM - 192 DMX LIGHTING CONTROLLER
Version 20090519
www.lightronics.com
Lightronics
Inc.
509
Central
Drive
Virginia
Beach,
VA
23454
757
486
3588
PROGRAMMING CHASES
The SM-192 contains 6 user programmable chases.
Each chase may include up to 240 steps.
EACH CHASE STEP CONSISTS OF A SCENE
WHICH HAS ALREADY BEEN RECORDED.
A chase step can use any scene in any bank. Any scene
can be used in multiple chase steps and multiple
chases.
ALL CHASE RECORD, EDIT, DELETE, AND COPY
FUNCTIONS ARE DONE IN THE PROGRAM MODE.
Hold down PROGRAM for about 3 second to activate
program mode. The display PROGRAM indicator will
flash continuously when program mode is active.
RECORD A CHASE
1. Select any chase (1 - 6) by pushing the applicable
CHASE
button.
2. Select the scene bank which contains the scene to
be used for the chase step using BANK UP or
BANK
DOWN.
3. Select the scene to be used for the chase step by
pushing its SCENES button (1 - 8).
4. Push MIDI/ADD. The display will flash several
times indicating recording of the step.
5. Repeat instruction steps 2 through 4 above as many
times as needed to record additional steps in the
selected chase. You can record up to 240 steps.
6. Exit from the program mode by holding down
PROGRAM for about 3 seconds.
COPY A SCENE BANK TO A CHASE
This will copy the contents of a scene bank into a
chase.
1. Select the bank you want to copy from using
BANK UP or BANK DOWN.
2. Select the chase you want to copy it TO by pushing
its CHASE selector button.
3. Push MUSIC/BANK COPY
4. Push MIDI/ADD. The display will flash briefly
indicating that the copy is completed.
INSERT A STEP INTO A CHASE
1. Select a chase (1 - 6) by pushing the applicable
CHASE
button.
2. Push TAPSYNC/DISPLAY. The display will
show the current chase and step.
3. Use BANK UP or BANK DOWN to advance to the
step BEFORE the step you want to insert.
4. Push MIDI/ADD. The display shows the next step.
5. Push the SCENES button (1 - 8) for the scene you
want to insert. Use BANK UP or BANK DOWN
if the scene to be inserted is in a different bank.
6. Push MIDI/ADD. The display will flash briefly
indicating that the insertion is complete.
DELETE A STEP IN A CHASE
1. Select a chase (1 - 6) by pushing the applicable
CHASE
button.
2. Push TAPSYNC/DISPLAY
3. Use BANK UP or BANK DOWN to advance to the
step you want to delete.
4. Push AUTO/DEL. The display will flash briefly
indicating that the step is deleted.
DELETE A COMPLETE CHASE
1. Hold down the CHASE button for the chase you
want to delete.
2. Push AUTO/DELETE. The display will flash
briefly indicating that the chase has been deleted.
3. Release both buttons.
CLEAR ALL CHASES
This will delete ALL steps of ALL chases. It does not
clear scenes.
1. Turn OFF the SM-192.
2. Hold down the BANK DOWN button AND the
AUTO/DEL button while turning the SM-192
power back ON. Keep the buttons held down for a
few seconds until the display flashes several times.
3. Release both buttons.