Lightronics SM192 - Manual (Page 5)

INSTRUCTION MANUAL
Page 5 of 9
SM - 192 DMX LIGHTING CONTROLLER Version 20090519
www.lightronics.com
Lightronics Inc. 509 Central Drive Virginia Beach, VA 23454 757 486 3588
EDIT A SCENE
1. Select desired bank to store the scene in using
BANK UP or BANK DOWN.
2 Select desired scene within the bank by pushing its
SCENES button (1 - 8).
3. Select the fixture(s) to be affected by pushing the
associated SCANNERS buttons.
4. Adjust the appropriate faders to set the desired
output level for each channel.
5. Push MIDI/ADD.
6. Push the SCENES button used in step 2 to store the
edited scene. The display will flash briefly to
indicate that recording is complete.
7. Deselect any fixtures you have used during editing
and exit from PROGRAM mode.
COPY FIXTURE SETTINGS
You can copy the settings of a fixture to another while
programming a scene.
1. While a fixture is selected, hold its SCANNERS
button
down.
2. Push the SCANNERS button of the fixture to copy
the fixture settings to.
COPY A SCENE
You can copy the contents of a scene to another scene
in the same or different bank.
1. Select the bank holding the scene you want to
copy from using BANK UP or BANK DOWN.
2 Select desired scene within the bank by pushing it's
SCENES button (1 - 8).
3. Push MIDI/ADD.
4. Select the bank which you want to copy to using
BANK UP or BANK DOWN.
5. Push the SCENES button for the scene to copy to.
The display will flash briefly indicating that the
copy has been completed.
COPY A BANK OF SCENES
This will copy the entire contents of a scene bank to
another bank.
1. Select the bank you want to copy FROM using
BANK UP or BANK DOWN.
2. Push MIDI/ADD.
3. Select the bank you want to copy TO using
BANK UP or BANK DOWN.
4. Push MUSIC/BANK COPY. The display will
flash briefly indicating that the copy has been
completed.
DELETE A SCENE
This will set all channels of all fixtures associated with
the scene to zero output level.
1. Select the bank which contains the scene you want
to delete using BANK UP or BANK DOWN.
3. Hold down AUTO/DEL and push the SCENES
button (1 - 8) for the scene to be deleted. The
display will flash briefly indicating that the
deletion is complete.
DELETE ALL SCENES IN A BANK
1. Select the bank to be deleted using BANK UP or
BANK
DOWN.
2. Hold down AUTO/DEL and push MUSIC/BANK
COPY. The display will flash briefly indicating the
deletion is complete.
CLEAR ALL SCENES
This will delete ALL scenes in ALL banks.
1. Turn OFF the SM-192.
2. Hold down PROGRAM and BANK DOWN while
turning the power back on.
3. Keep the buttons held down for a few seconds
until the display flashes briefly.