AEG LAVAMAT 60300 - Manual (Page 27)

Operating instructions
27
What to do when…
3
The somewhat different, in comparison to older wash-
ing machines, whistling noise during spinning is due to
the modern drive system.
A rattling sound on startup – in particular when using
for the first time – is caused by the circulation pump
and is due to the design.
Trouble Shooting
In the case of a malfunction try to solve the problem with the aid of
the notes given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer’s visit is not free of
charge, even during the period of guarantee.
Malfunction Possible Cause Remedy
Washing machine does
not work.
Mains plug is not plugged in. Insert mains plug.
House fuse in defective.
Replace fuse or switch on
trip.
The machine does not
take in water.
Door is not closed properly.
Close door, lock must engage
audibly
Tap is closed.
Press the M (ON/OFF) but-
ton;
Open tap;
Reselect program;
Press the M (ON/OFF) button
again.
Sieve in the threaded fitting
on the water inlet hose is
blocked. Unscrew the hose from the
tap, remove the sieve and
clean under running water