AEG LAVAMAT 60300 - Manual (Page 11)

Operating instructions
11
3
Rinse hold (o) means: the washing is left in the last rinse water, it is
not spun.
Position 5 (CONDITIONER)
Separate conditioning, separate starching, separate treatment of wet
cotton/linen or easy-care washing (1 rinse, liquid conditioner is washed
in from the w compartment, spinning in accordance with the selected
washing type or rinse hold).
Position 6 (SPIN)
Spinning after a rinse hold or separate spinning of hand washed fabrics
in accordance with the selected washing type.
Position 7 (SOAKING)
Separate soaking (temperature automatically limited to a maximum of
40°C), the washing is left in the water at the end of the program
(Not for washing type s/WOOLLENS).
3
After soaking the required main wash must be set, the program does
automatically continue.
Position 8 (PUMP OUT)
Pumps out the water after a rinse hold (without spinning).
Temperature Selector
You can set the following temperature
levels on the temperature selector:
r (COLD), 30, 40, 50, 60, E, 70, 80, 95
2
The E setting (Energy Saving Program) is
suitable for lightly to normally soiled cot-
tons; temperature reduced to approx. 67°C.
Washing Type Button
The program sequence (e.g. max. possible tempe-
rature, water level, drum movement, number of
rinses, spin speed) is altered to suit the type of
washing using the washing type buttons.
t (COTTONS/LINEN)
For cottons and linen.
} (EASY-CARES)
For easy-care washing (mixed fabrics). Tempera-
ture automatically limited to a maximum of
60°C.