Lectrosonics SPNDNT - Manual (Page 10)

ASPEN Digital Processor
LECTROSONICS, INC. 10
Dante Software
Dante Controller
This is a second software package needed to route
network audio signals between the SPNDNT and other
nodes on a Dante network. The software is download-
ed from the Audinate web site and will run on Windows
and Mac platforms.
Dante Controller is
used to assign the
transmit and receive
signals between
multiple Dante
devices. When a
device is set to
receive a signal from
another device that
is transmitting, it is said to subscribe to the transmit-
ted signal. These subscriptions appear in the Dante
Controller window as green check marks.
Browser based Help Files are provided to explain vari-
ous icons and setup tabs.
Download the software from: http://www.audinate.com
The installation is quick and simple.
Dante TM Software
Installation
Bonjour Print Services (for Windows only)
Download the Bonjour Print Services for Windows
installer into a temporary folder or desktop on your PC.
http://support.apple.com/kb/DL999
Double click on the file to open the installer. If the
Security Warning dialog box opens, click on Run to
launch the installer and follow the on screen prompts.
Set Up Audinate Account and Download the
Dante Controller Installer
Set up an account with Audinate to gain access to the
free Dante Controller software. Click on Login at the
top of the screen and the forms page will open.
http://www.audinate.com
After your account is set up, return to the home page
and click on Support->Software Downloads->Dante
Controller. Log In on the next page and follow the on
screen prompts to download the installer and store the
file on your local drive.
Install Dante Controller
NOTE: Install Bonjour Print Services for
Windows before installing Dante Controller.
Double click on the downloaded file to open the in-
staller. If the Security Warning dialog box opens, click
on Run to launch the installer and follow the on screen
prompts.