Lectrosonics NS1 - Manual

NS NS NS NS NS1 1 1 1 1
TECHNICAL DATA
Portable Noise Generator
The Lectrosonics NS1 Portable Noise Generator is a
multifunction instrument designed primarily to facili­
tate fast, accurate setup of the Lectrosonics Modular
Automatic Mixing system. By providing a consistent
noise source, the input trim (gain) on each mic preamp
channel can be accurately adjusted to compensate for
the variation in sensitivity that occurs in some micro­
phone designs.
The built in speaker provides an acoustic noise source
for individual channel adjustment or to monitor exter­
nal signals connected to the ¼” jack. Wideband pink
noise or 3kHz 1/3 octave filtered pink noise is avail­
able at the balanced XLR line output for room
equalization and checking high frequency driver cov­
erage in multi-way speaker systems. The housing and
mechanical parts are made of machined aluminum for
lasting ruggedness in the field
• Internal speaker with level control
• Wideband pink noise
• 3kHz filtered pink noise
• Balanced XLR output
• 1/4” phone jack input
• Powered by two 9V batteries
3.2"
LECTROSONICS
POWER
NOISE GENERATOR
3kHz
SPKR OUTPUT
ON
PINK
OFF
1 NS
EXT
AUDIO IN
1.22"
1 2
3
LECTROSONICS, INC.