Lectrosonics Venue 3.9 - Manual (Page 15)

Digital Hybrid Wireless™ Modular Receiver System
5. When the driver installation is complete, the final
page of the Wizard appears. Click “Finish” to close
the Found New Hardware Wizard.
USB Driver Installation (Windows XP) -
Subsequent Installations
The Windows XP operating system regards all Lec­
Net2 ™ devices as separate USB devices because each
has a unique serial number. Because of this, Windows
XP will want to install the USB driver every time it
encounters a LecNet2 ™ device whose serial number it
does not recognize. However, the process is simplified
if the LecNet2 ™ USB driver has already been installed
at least once before on the same computer system. Use
the following procedure if the LecNet2 ™ USB driver was
previously installed on the computer system.
1. On the first page of the Wizard, select Install the
software automatically Recommended) then click
“Next>”.
2. Windows will discover the previously installed
driver. If a dialog box opens warning you that the
driver has not passed Windows Logo Testing, click
“Continue Anyway.”
3. When the driver installation is complete, the final
page of the Wizard appears. Click “Finish” to close
the Found New Hardware Wizard.
Rio Rancho, NM 15