Leader electronics corp – LEADER LT450 User Manual

Page 6

HDMI

Standards:

HDMI 1.3a, HDCP 1.2

TMDS

Output Format:

G,B,R/Y,PB,PR 4:4:4 8 bit and
Y,PB,PR 4:2:2 8/10/12 bit
Only RGB output is available for
SVGA, XGA, SXGA, and UXGA.

Deep Color:

G,B,R/Y,PB,PR 4:4:4 10/12 bit
Supports HDMI 1.3a Primary Video
Formats
VGA (640x480@60 Hz),
720p/59.94, 1080i/59.94,
480p/59.94, 480i/59.94 (1440),
720p/50, 1080i/50, 576p/50,
576i/50 (1440)

xvYCC:

Future support

Link:

Single

Variable Output Levels

Video Signal:

The video signal levels for G, B, R
and Y, PB, PR can be adjusted
separately.
(Linked to analog component and
DVI-I)

Variable range:

0 to 100 % (1 % unit). 100 % is the
normal level.

Audio

Internal

Format:

AES/EBU

Channels:

Output Level:

0 dB

Frequency:

Switch between OFF, 400 Hz, and
1 kHz

Sampling Frequency: 32, 44.1, 48 kHz
Number of Quantization Bits: 16 bits

External Input:

SPDIF coaxial

InfoFrame:

Supports AVI, SPD, and AUDIO
InfoFrames

HDCP:

Includes a production key

DDC:

DDC2B

Hot Plug Detection:

ON/OFF selectable using the menu

CEC:

Checks connection with Physical Address>

LipSync:

Future support

Connector:

HDMI Type A

Simple Motion Pictures

Simple Motion Pictures:

Pattern scroll

Scroll Directions:

Up/down and left/right

Scroll Speed Settings

Progressive:

Vertical:

0 to 256 lines/frame
(1 line steps)

Horizontal: 0 to 256 dots/frame

(4-dot steps)

Interlace:

Vertical:

0 to 256 lines/field
(2 line steps)

Horizontal: 0 to 256 dots/field

(4-dot steps)

External Interface

RS232C Connector

Function:

Remotely control the LT 450
settings from an external PC via
RS232C.

Connector:

D-sub 9-pin (male)

USB Connector (Front Panel)

Function:

Remotely control the LT 450
settings from an external PC via
USB (future support).

Connector:

USB (B type)

USB Connector (Rear Panel)

Function:

Save and load preset data from
USB memory (future support).

Connector:

USB (A type)

Ethernet

Function:

Remotely control the LT 450
settings through Telnet.

Remote

Function:

Increment or decrement the
recalled address through an
external contact input.

Connector:

XM4K-1542-112 (by Omron)

Preset/Recall

Store and recall up to 100 panel settings (addresses 00 to 99)
Area Settings:

Set a range of consecutive
addresses to be recalled from the
100 addresses.

BEGIN:

Recall start address

END:

Recall end address

Startup Memory

Stores the panel settings at power-on to the internal memory

General Specifications

Environmental Conditions

Operating Temperature:

0 to 40

°C

Operating Humidity:

≤ 85 % RH (without condensation)

Spec-Guaranteed Temperature: 10 to 35

°C

Spec-Guaranteed Humidity:

≤ 85 % RH (without condensation)

Operating Environment:

Indoor use

Operating Altitude:

up to 2,000 m

Overvoltage Category:

Pollution Degree:

Power Requirements:

90 to 250 VAC, 50/60 Hz

Power Consumption:

80 W max.

Dimensions and Weight:

426 (H) x 88 (W) x 400 (D) mm
(excluding projections)
5.8 kg

Accessories:

Power cord

Instruction Manual

2-6-33 Tsunashima-Higashi, Kohoku-ku, Yokohama 223-8505, Japan PHONE: 81-45-541-2123 FAX: 81-45-541-2823

LEADER ELECTRONICS CORP.

http://www.leader.co.jp

Oct. 30, 2007 07101.5K 1 Printed in Japan

LEADER INSTRUMENTS CORP. (U.S.A.)

PHONE:1-714-527-9300

LEADER INSTRUMENTS (H.K.) LTD.

PHONE:852-2721-2503

LEADER ELECTRONICS CORP. BEIJING OFFICE

PHONE:86-10-8511-8606/8607

LEADER INSTRUMENTS (H.K.) LTD. DONGGUAN OFFICE PHONE:86-769-83829381, 83829391
LEADER ELECTRONICS CORP. SHANGHAI OFFICE

PHONE:86-21-62756905, 62759629

LEADER ELECTRONICS EUROPEAN OFFICE

PHONE:31-40-2565008

SPECIFICATION CHANGES: LEADER ELECTRONICS CORP. reservers the right to discontimue the sale of instruments and/or change the specifications of
instrments at any time without responsibility for the incorporation of new features in the instrumens already sold.