Impulse 2803 - Manual (Page 4)

Installation
Installation Instructions
Windows 98/ME/2000/XP/Vista™ Operating Systems
Do not connect the device to a USB port until the software is installed.
1. Start Windows.
2. Insert the Sealevel Software CD in to your CD drive.
3. If ‘Auto-Start’ is enabled the installation window will
automatically appear. Otherwise, navigate to the root directory of
your CD drive and double-click the ‘autorun.exe’ application to
launch the installation window.
4. Select ‘Install Software’.
5. Select the Part Number for your device from the listing.
6. The setup file will automatically detect the operating environment
and install the proper components. Follow the information
presented on the installation screens that follow.
7. A screen may appear with the declaration: “The publisher cannot
be determined due to the problems below: Authenticode signature
not found.” Please select the ‘Yes’ button and proceed with the
installation. This declaration simply means that the Operating
System is not aware of the driver being loaded. It will not cause
any harm to your system.
8. During setup, you may specify installation directories and other
preferred configurations. This program also adds entries to the
system registry that are necessary for specifying the operating
parameters for each driver. An uninstall option is included to
remove the driver and all registry/INI file entries from your
system.
9. Proceed with the physical installation of your SeaLINK USB serial
adapter.
NOTE:
Windows NT is not USB aware and thus cannot
support this device.
Sealevel Systems SeaLINK+8 Page 2