Impulse 3612 - Manual (Page 10)

Appendix A - Troubleshooting
Sealevel Systems PC-ACB.MP Page 8
Appendix A - Troubleshooting
The Developers Toolkit Software is supplied with the Sealevel Systems adapter and will be used in the
troubleshooting procedures. Using this software and following these simple steps can eliminate most common
problems without the need to call Technical Support.
1. Identify all I/O adapters currently installed in your system. This includes your on-board serial ports, controller
cards, sound cards etc. The I/O addresses used by these adapters, as well as the IRQ (if any) should be
identified.
2. Make sure the Sealevel Systems adapter is securely installed in a PCMCIA slot.
3. Use the supplied software and User Manual to verify that the Sealevel Systems adapter is configured correctly.
The supplied software contains a diagnostic program “SSDMP” that will verify if an adapter is configured
properly. This diagnostic program is written with the user in mind and is easy to use.
4. Windows users can use the installed programs in the SeaMAC folder to verify operation.