Impulse 8126 - Manual (Page 12)

8126 – 32 Channel TTL
The SeaDAC Lite 8126 provides 32 channels of buffered drive digital I/O. The
module addresses the 32 channels of I/O as four eight-bit ports, each programmable
as input or output. Use a standard 50-pin IDC ribbon cable to connect an industry
standard relay rack for PC based control and automation of equipment including
sensors, switches, security control systems, and other industrial automation systems.
A status LED lights when the 8126 is successfully communicating with a USB port.
8126-KT iPorthole
8126-OEM
Power Requirements
Max Output Power: +5VDC @ 350mA
Inputs
Logic High: Min 2VDC
Logic Low: Max 0.8VDC
Outputs *
Logic High: Max 0.5VDC @ 64mA
Logic Low: Min 2VDC @ 32mA
NOTE: The 8126 modules are designed to work with industry standard
solid-state relay racks that expect negative logic to operate. The
8126 modules expect positive logic on the inputs. Refer to the I/O
Wiring section of this manual for more information.
© Sealevel Systems, Inc. - 10 - SeaDAC Lite User Manual