Impulse SCMXRK-002 - Manual (Page 10)

For information call 800-444-7644 146
SensorLex ® 8B Isolated Analog Signal Conditioning Products 8B
©1995-2009 Dataforth Corporation, All Rights Reserved ISO9001:2000-Registered QMS
SCMXRAIL1-XX, SCMXRAIL2-XX, SCMXRAIL3-XX
DIN Rail
Figure 14: DIN Rail Styles
Description
Three styles of DIN rail are available. Specify length (-xx) in meters when
ordering, -01 for 1 meter or -02 for 2 meter.
Figure 15: 8BPxx-2, 8BPxx-3 Backpanel DIN Rail Mounting Option
8BXCJC
Cold Junction Compensation Sensor
Description
Packaged for use in customer designed mounting boards. This part has an initial
tolerance of ±0.25% and comes in a standard 1206 resistor format.
8BPT
Pass-Through Module
Description
The 8BPT is a pass-through module used to establish a direct connection
between an input signal and the 8B series backplane analog bus. It has unity
gain and no isolation. It accepts up to ±10V input and provides up to ±10V output.
8B-PROTO
Breadboard Kit
Description
The 8B-PROTO breadboard kit was designed to allow users to incorporate their
own module functions using an 8B format. The kit includes a PC board with pins
designed for breadboard circuits, a module case, header and mounting screw.
Contact the factory for additional information.