Impulse 8B39 - Manual (Page 2)

Visit our website www.dataforth.com 19
SensorLex ™ 8B Isolated Analog Signal Conditioning Products 8B
Specifications
Typical at T
A
=+25°C and +5V power
Input Voltage Range ±5V or 0V to +5V ±5V
Input Voltage Maximum ±20V (no damage) *
Input Resistance 50M Ω *
Output Current Range 0 to 20mA or 4 to 20mA ±20mA
Over Range Capability 10% *
Output Compliance Voltage
(Open Circuit) 15VDC ±12VDC
Load Resistance Range 0 to 500 Ω 0 to 400 Ω
Output I Under Fault, max 26mA ±26mA
Output Protection
Continuous 40VAC *
Transient ANSI/IEEE C37.90.1 *
CMV, Output to Input 1500Vrms max *
Transient, Output to Input ANSI/IEEE C37.90.1 *
CMR (50Hz or 60Hz) 110dB *
NMR (–3dB at 100Hz) 60dB per Decade *
above 100Hz
Accuracy (1) ±0.05% Span *
Nonlinearity ±0.02% Span *
Stability
Zero ±10ppm/°C *
Span ±50ppm/°C ±100ppm/°C
Noise
Output, 100kHz 2µArms *
Bandwidth, –3dB 100Hz *
Rise Time, 10 to 90% Span 5ms *
Power Supply Voltage +5VDC ±5% *
Power Supply Current 100mA *
Power Supply Sensitivity ±100ppm/% *
Mechanical Dimensions 1.11" x 1.65" x 0.40" *
(h)(w)(d) (28.1mm x 41.9mm x 10.2mm) *
Environmental
Operating Temp. Range –40°C to +85°C *
Storage Temp. Range –40°C to +85°C *
Relative Humidity 0 to 95% Noncondensing *
Emissions EN61000-6-4 ISM, Group 1
Radiated, Conducted Class A *
Immunity EN61000-6-2 ISM, Group 1
RF Performance A ±0.5% Span Error *
ESD, EFT, Surge, Voltage Dips Performance B *
Module 8B39-01,-02,-03,-04 8B39-07
Ordering Information
Model Input Range Output Range
8B39-01 0V to +5V 4mA to 20mA
8B39-02 –5V to +5V 4mA to 20mA
8B39-03 0V to +5V 0mA to 20mA
8B39-04 –5V to +5V 0mA to 20mA
8B39-07 ±5V –20mA to +20mA
NOTES:
* Same specification as -01, -02, -03, -04 models.
(1) Includes nonlinearity, hysteresis and repeatability.