Impulse UNO-1172AH - Manual

Embedded Automation Computers
Features
UNO-1172AH
Class I, Division 2 Certified Intel ® Atom ™
D510 DIN-rail PC with 3 x LAN, 2 x COM,
VGA, Mini-PCIe
Specifications
General
ƒ Certification CE, FCC Class A, UL, CCC
ƒ Hazardous Locations US: ANSI/ISA 12.12.01-2007 cUL: CSA 22.2 No. 213 M1987,
Class I, Division 2, Groups A,B,C,D, Hazardous Location,
Temperature code: T5, Ambient Temperature Range: -10°C ≤
T
amb
≤ 60°C
ƒ Dimension (W x H x D) UNO-1172AH: 85 x 152 x 139 mm (3.4" x 6"x 5.5")
Enclosure Aluminum + SECC
ƒ Mounting DIN-rail, Wallmount
ƒ Power Consumption 24 W (Typical)
ƒ Power Requirement 9 (Min.) ~ 36 (Max.) V
DC
(e.g +24 V @ 2 A) (Min. 48 W), AT/
ATX power mode by Jumper selection and BIOS AT simulation
(support system reboot automatically after power recovery)
ƒ Weight UNO-1172AH: 1.6 KG
ƒ OS Support WES Windows XP Embedded, Windows XP & Windows 7,
Windows CE 6.0, Linux, QNX
ƒ System Design Fanless design with no internal cabling
ƒ Remote Management Built-in Advantech DiagAnywhere agent on Windows CE / XPe
System Hardware
ƒ CPU Atom D510 1.67GHz
ƒ Memory 2GB DDR2 SDRAM built-in
ƒ Battery Backup SRAM 1 MB
ƒ Indicators System:LEDs for Power, CF, LAN (Active, Status), Serial
(Tx, Rx), Diagnosis /Alarm: over system temperature, over
voltage, alarm for battery backup SRAM, alarm for RTC
battery,Programmable(while disable Serial Tx&Rx), Buzzer for
Diagnosis (programmable)
ƒ Keyboard/Mouse 1 x PS/2
ƒ Storage SSD: 1 x internal type I/II CompactFlash slot
HDD: one 2.5" SATA HDD bracket
ƒ Display DB15 VGA connector, 1600x1200 @ 85 Hz
ƒ Audio 5.1 channel HD Audio, Mic in, Line in, Line out
ƒ Watchdog Timer Programmable 256 levels timer interval, from 1 to 255 sec
ƒ Mini-PCIe 1x PCI express mini card slot
I/O Interface
ƒ Serial Ports 2 x RS-232/422/485 with DB9 connectors,Automatic RS-485
data flow control
2x RS-232 (Optional, pin header)
ƒ Serial Port Speed RS-232: 50 ~ 115.2 kbps
RS-422/485: 50 ~ 115.2 kbps (Max)
ƒ LAN 3 x 10/100/1000 Base-T RJ-45 ports (supports Wake on LAN,
Teaming, built-in boot ROM, and IEEE1588 hardware support)
ƒ USB 4 x USB, EHCI, Rev. 2.0 compliant
ƒ Digital Output 8-ch DO- 200 mA max/channel sink current
- Keep output status after system hot reset
- 5 ~ 40 V
DC
output range and 10 kHz speed
ƒ System Diagnoses Output: over system temperature, over voltage, battery power
fail, power status
Input: Power On/Off, Reset
Environment
ƒ Ingress Protection IP40
ƒ Operating Temperature (IEC 60068-2-2, 100% CPU/ I/O loading)
-10 ~ 65°C (-4 ~ 149°F)
ƒ Storage Temperature -20 ~ 80°C (-4 ~ 176°F)
ƒ Operating Humidity 20 ~ 95% (non-condensing)
ƒ Storage Humidity 0 ~ 95% (non-condensing)
ƒ Shock Protection IEC 60068- 2-27
CompactFlash: 50 G @ wall mount, half sine, 11 ms
HDD: 20 G @ wall mount, half sine, 11 ms
ƒ Vibration Protection IEC 60068- 2-64 (Random 1 Oct./min, 1hr/axis.)
CompactFlash: 2 Grms @ 5 ~ 500 Hz,
HDD: 1 Grms @ 5 ~ 500 Hz
Ordering Information
ƒ UNO-1172AH-A33E CID2 Atom D510 1.67GHz, 2GB RAM DIN-rail PC
Accessories
ƒ UNO-FPM11-BE UNO-1100 Series VESA Mount Kit
ƒ PCLS-DIAGAW10 Advantech Remote Monitoring & Diagnosis Utility
ƒ UL listed for Hazardous Locations: Class I, Division 2
ƒ Onboard Intel ® Atom D510 1.67GHz
ƒ Onboard 1 MB battery-backup SRAM
ƒ System diagnosis through led and digital output, remote power control
through digital input
ƒ Two RS-232/422/485 ports with automatic flow control
ƒ Three 10/100/1000 Base-T RJ-45 ports with teaming function support
ƒ 4 x external USB
ƒ PC/104+ expansion slots option
ƒ 1 x Mini-PCIe slot for WLAN card and Fieldbus card
ƒ Windows 7, Windows CE, XP Embedded and Linux support
ƒ Fanless design with no internal cabling
ƒ Isolation between chassis and power ground
Introduction
In hazardous locations, devices are under potential danger from flammable gases, combustible dust, or ignitable fibers, creating the potential for fire and explosions. UNO-1172AH
are designed to be safely operated in these locations and are UL listed for Hazardous Locations with Class I, Division 2, groups A, B, C, D & T5 certification. The UNO-1172AH is
an Intel Atom DIN-rail PC which features an innovative system diagnosis feature for automation applications. They provide alarms for over temperature, over voltage, battery power
fail, power status on both system onboard LED and Digital output. They also include remote power control through digital input. These system diagnosis features enable control
and monitoring of system status remotely. Three Gigabit Ethernet interfaces with teaming function support allow users to uplink two ports with data transmission fault tolerance and
downlink one port to field device.
UNO-1172AH
NEW
RoHS
COMPLIANT
2002/95/EC