Impulse UNOP-1514C - Manual

www.advantech.com/products Online Download
8-port RS-232/422/485 with and
without port-to-port Isolation
4-port Isolated RS-232/422/485
with IRIG B
4-port Fiber Optic LAN Card
NEW NEW NEW
UNOP-1628D/1618D
UNOP-1624D
UNOP-1514C
UNOP-1628D/1618D UNOP-1624D UNOP-1514C RoHS
COMPLIANT
2002/95/EC
RoHS
COMPLIANT
2002/95/EC
RoHS
COMPLIANT
2002/95/EC
Specifications
General
ƒ Connector 120-pin connector for UNO-
4673A/PCI
ƒ Dimension 5.3" x 6.0" (136 x 150 mm)
ƒ Power Consumption 5V ± 5% @ 620mA typical
3.3V ± 5% @ 75mA typical
ƒ Certification CE/FCC
Communication
ƒ IRQ All COM ports use the same
IRQ assigned by PCI Bus
ƒ COM Ports 8 x RS-232/422/485 ports
ƒ Data Bits 5, 6, 7, 8
ƒ Stop Bits 1, 1.5, 2
ƒ Parity None, Even, Odd
ƒ Baud-rate (bps) RS-232: 50 ~ 115.2 kbps
RS-422/485: 50 ~ 921.6 kbps
(Max.)
ƒ Data Signals TxD, RxD, RTS, CTS,
RI,DSR,DTR,DCD,GND for
RS-232
Data+, Data-, GND for RS-485
Tx+, Tx-, Rx+, Rx- for RS-422
Protection
ƒ Isolation Protection 2000 V
DC
(UNOP-1628D)
Environment
ƒ Operating Temp. -20 ~ 70°C (-4 ~158°F)
ƒ Operating Humidity 10 ~ 90% RH
non-condensing (refer to IEC
60068-2-3)
ƒ Storage Humidity 5 ~ 95% RH non-condensing
(refer to IEC 60068-2-3)
Ordering Information
ƒ UNOP-1618D-AE 8-port RS-232/422/485 for
UNO-4673A
ƒ UNOP-1628D-AE 8-port Iso.
RS-232/422/485 for
UNO-4673A
Specifications
General
ƒ Connector 120-pin connector for
UNO-4673A/PCI
ƒ Dimension 5.3" x 6.0" (136 x 150 mm)
ƒ Power Consumption 5V ± 5% @ 500mA typical.
3.3V ± 5% @ 180mA typical.
ƒ Certification CE/FCC
Communication
ƒ IRQ All COM ports use the same
IRQ assigned by PCI Bus
ƒ COM Ports 4 x RS-232/422/485 ports
ƒ Baud rate (bps) RS-232: 50 ~ 115.2 kbps
RS-422/485: 50 ~ 921.6 kbps
(Max.)
ƒ Data Signals TxD, RxD, RTS, CTS, RI,
DSR, DTR, DCD, GND for
RS-232Data+, Data-, GND for
RS-485Tx+, Tx-, Rx+, Rx- for
RS-422
IRIG Time Code Input
ƒ IRIG Interface Male 9-pole D-Sub connector
(COM4 or IRIG-B)
ƒ ST Multi-Mode Fiber connector
Female BNC
ƒ Input Signal RS-422 input signal isolated by
optocoupler Optical signal @
820nm; TTL
ƒ Supported Formats IRIG-B according to IRIG
STANDARD 200-04, 200-98
IRIG Time Code Output
ƒ IRIG Interface Male 9-pole D-Sub connector
(COM4 or IRIG-B)
Female BNC
ƒ Output Signal RS-422 output signal; TTL
IRIG Time Code Decoding
ƒ Message syntax YYYYQQQHHMMSS
(yr, d, h, min, sec)
ƒ Resolution of the time 1s
ƒ Status info 1 status LED for indication
Protection
ƒ Isolation Protection 2000 V
DC
Environment
ƒ Operating Temp. -20 ~ 70°C (-4 ~158°F)
ƒ Operating Humidity 10 ~ 90% RH non-condensing
(refer to IEC 60068-2-3)
ƒ Storage Humidity 5 ~ 95% RH non-condensing
(refer to IEC 60068-2-3)
Ordering Information
ƒ UNOP-1624D-AE 4-port Iso.
RS-232/422/485 and IRIG B for
UNO-4673A
Specifications
General
ƒ Connector 120-pin connector for UNO-
4673A/PCI
ƒ Dimension 5.3" x 6.0" (136 x 150 mm)
ƒ Power Consumption 5V ± 5% @ 2000 (at least) mA
ƒ Certification CE/FCC
Fiber Optic LAN
ƒ Standard IEEE 802.3, 802.3u, 802.3x
LAN 100Base-FX
ƒ Transmission Up to 2 km
Distance
ƒ Wavelength 1300 nm
ƒ Transmission Speed Up to 100 Mbps
Interface
ƒ Connectors 4 x SC type Multi-mode
Fiber Optic connector
ƒ LED Indicators Active, Link (100Base-FX)
ƒ Power Consumption Max. 10W
Environment
ƒ Operating Temp. -20 ~ 70°C (-4 ~158°F)
ƒ Operating Humidity 10 ~ 90% RH noncondensing
(refer to IEC 60068-2-3)
ƒ Storage Humidity 5 ~ 95% RH
non-condensing
(refer to IEC 60068-2-3)
Ordering Information
ƒ UNOP-1514C-AE 4-port Fiber Optic LAN Card for
UNO-4673A