Impulse PWR-PS5R - Manual

High Performance Signal Conditioners DSCA
For information call 800-444-7644 200
PWR-PS5R Series
Switching Power Supplies
Dataforth’s new PWR-PS5R series sets new standards for switching power
supply technology. Combining rugged, compact enclosures, incorporating all
international standards and approvals, and offering customers a broad selection
of inputs and outputs, the PWR-PS5R series makes your power supply choice
a simple one. The PWR-PS5R series is UL, C-UL and TUV Approved, CE
Compliant, and UL 508 Listed. Models are available with output ratings from
7.5W to 100W with 24VDC output voltages. Customers may choose from a very
wide range of input voltages (85 to 264VAC, and 105 to 370VDC compatible),
making the PWR-PS5R series an unbeatable package of versatility.
Features
• Universal AC Input (85 to 264VAC)
• DC Compatible Input (105 to 370VDC)
• Unique Spring-Up Terminals
• DIN Rail or Panel Mount
• Five Different Output Capacities: 7.5W to 100W
• UL, C-UL, and TUV Approvals
• CE Compliant, UL 508 Listed
• Certified to EN60950
• IP20 Protection (EN60529)
• Compliant with EMC Directives EN50081-2 and
EN50082-2
Specifications PWR-PS5R Series
2.95"
(75mm) 3.54"
(90mm)
Front View Bottom View
3.54"
(90mm)
(Consult factory for other model drawings.)
PWR-PS5RC/D
3.74"
(95mm)
Ordering Information
Model Power Output
PWR-PS5RA 7.5W 24VDC/0.3A
PWR-PS5RB 15W 24VDC/0.6A
PWR-PS5RC 30W 24VDC/1.3A
PWR-PS5RD 50W 24VDC/2.1A
PWR-PS5RE 100W 24VDC/4.2A
Description
Model PWR-PS5RA PWR-PS5RB PWR-PS5RC PWR-PS5RD PWR-PS5RE
Input 100 to 240VAC nominal; 85 to 264VAC, 105 to 370VDC compatible 100 to 120VAC
200 to 240VAC
(Jumper Selectable)
Frequency 47 to 63Hz
Input Current 0.17A at 100V 0.3A at 100V 0.68A at 100V 1.15A at 100V 2.5A at 100V
0.11A at 200V 0.2A at 200V 0.45A at 200V 0.75A at 200V 1.5A at 200V
Output Voltage &
Current Ratings
24V, 0.3A 24V, 0.6A 24V, 1.3A 24V, 2.1A 24V, 4.2A
Temperature Change 0.05%
Ripple Voltage 2% p-p maximum (including noise)
Overcurrent Protection 105% minimum
Overvoltage Protection 120% minimum (Zener-limiting) 120% minimum, auto reset
Between input and output terminals: 3,000VAC, 1 minute
Dielectric Strength Between input terminals and housing: 2,000VAC, 1 minute
Between output terminal and housing: 500VAC, 1 minute
Insulation Resistance Between input and output terminals/input terminal and housing: 100M Ω minimum (500VDC megger)
Operating Temperature –10 to +60°C
StorageTemperature –30 to +85°C
Operating Humidity 20 to 90% RH (avoid condensation)
Dimensions 1.77" x 2.76" 1.77" x 3.74" 3.54" x 3.74" 3.54" x 3.74" 5.71" x 3.74"
(w x d) (45mm x 70mm) (45mm x 95mm) (90mm x 95mm) (90mm x 95mm) (145mm x 95mm)
All H = 2.95" (75mm)
Terminal Screw M3.5 Phillips screws in spring-up terminals