Impulse W10I93S-PMH1HM - Manual (Page 18)

18
Step2. Enter CAN BUS Folder. Install “setup.msi”. Then finish the installation.
3-3
Brightness Adjustment
In our new product – 10.1” Panel PC, the dimming control has to install drivers and software to
work brightness control properly. Please do following steps:
Step1 Installing Driver
You can find the driver in the Touch & Driver CD. Find the 「Backlight Control Driver」 folder
and double click the “install.bat” install file.
Step2 Installing .NET Framework 2.0
To install .net Framework, you have to click the .net Framework installation file dotnetfx.exe in
「Framework 2.0」folder for working normally.
Step3 Installing Backlight Control Software
To install Back Light Control Software: Click the setup file setup.msi in 「Backlight Control
Software」Folder and Confirm Installation, then dimming control enabled by buttons by button at
the front bezel.