Chapter 3 driver installation, Touch driver installation, Configuration utility – Impulse W10I93S-PMH1HM User Manual
Page 15

15
Chapter 3 Driver Installation
3-1
Touch Driver Installation
HMI series default is Premier Touch. The touchscreen system consists of a touchscreen and an
electronic touchscreen controller. The attached Driver CD contains drivers of the touch panel
controller.
Follow the steps as below to install TouchKit:
Step1 Put the TouchKit CD to CD-ROM
Step2 Open the Win2000_XP directory.
Step3 Double click the Setup.exe, then system starts to run the installation program.
Notice: Do not plug the USB controller on the system before the installation has been finished.
Step.4 Click Next to continue installation. And it will auto-detect touch devices in COM2 port at
your Panel PC
Step.5 Following the step by step to finish the driver installation
3-1-1
Configuration Utility
After finishing the installation, please follow the steps to test the configuration utility.
Step.1 Click the “TouchKit” shortcut function in the desktop.