Impulse VDX-6324RD-FD User Manual
Vdx-6324-fd, Specifications, Packing list
All Specifications are subject to change without notice.
71
w
w
w .
i
c
o
p
.
c
o
m
.
t
w
1
μProcessor
Module
2
Mity/Tiny CPU
Module
3
PC/104 CPU
Module
4
Half-Size CPU
Module
5
3.5” CPU
Module
6
Peripheral
Module
7
Display Product
Series
8
Accessories &
Technical Information
VDX-6324-FD
256MB/4S/4USB/VGA/LCD/LAN/
GPIO/CF/FDD/PWMx16
Specifications
SoC
DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
Cache
L1:16K I-Cache, 16K D-Cache, L2 Cache 128 KB
Bus
PC/104 standard compliant
PCI-104 (Optional)
BIOS
AMI BIOS
System Memory
256/512MB DDR2 Onboard
Watchdog Timer
Software programmable from 30.5µ sec.to 512 sec.
x 2 sets (Watchdog 1 fully compatible with M6117D)
VGA
XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support
Onboard 32MB VGA Memory, support resolution up to 1280
x 1024, 16M colors
LAN
Integrated 10/100Mbps Ethernet
Audio
CM119 USB Audio Controller (Optional)
Flash Disk Support
Onboard 4MB SPI Flash Disk
MSTI EmbedDisk Module (16MB and above)
Compact Flash Type I/II
44-pin IDE to Micro SD (Optional)
PWM
16~24 Channels
SRAM support
512KB (Optional)
I/O Interface
Enhanced IDE port (UltraDMA-100/66/33) x1
FDD x 1
RS-232 port x3
RS-232/422/485 port x1
USB port (Ver2.0) x4
Parallel port x1
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors
2.0mm 44-pin box header for IDE x1
2.0mm 44-pin box header for LCD x1
2.0mm 34-pin box header for FDD x1
2.54mm 26-pin box header for Printer x1
2.54mm 20-pin box header for 16-bit GPIO x1
2.54mm 10-pin box header for RS-232 x3
2.54mm 10-pin box header for USB x2
2.54mm 4-pin header for -5V, -12V, +12V, GND x1
2.54mm 3-pin header for RS-485 x1
2.54mm 2-pin header for Reset x1
2.54mm 7-pin header for Redundancy Signal x1 (Optional)
2.54mm 2-pin header for System-Fail-SW x1 (Optional)
1.25mm 6-pin wafer for JTAG x1
1.25mm 4-pin wafer for Line-out/MIC-in x2 (Optional)
4-pin male power connector x1
External 15-pin D-Sub female connector for VGA x1
External 9-pin D-Sub male connector for RS-232 x1
External RJ-45 connector for Ethernet x1
External Mini DIN connector for Keyboard/Mouse x1
Type I/II Compact Flash Slot x1
Power Requirement
Single Voltage +5V @ 720mA
Weight
180g
Board Size
184 x 122mm (7.24 x 4.80 inches)
Operating
Temperature
-20 °C ~ +70 °C
-40 °C ~ +85 °C (Optional)
Packing List
• VDX-6324-FD
• CD for User’s Manual & Driver x1
• Cable
HDD 44P (2.0) x1
FDD (2.0) x1
PRINT (2.54) x1
USB (2.54) x2
GPIO (2.54) x1
RS-232 (2.54) x3
YKB x1
Ordering information
• VDX-6324-FD
Vortex86DX Half-Size CPU Module with 256MB DDR2
• VDX-6324-FD-512 Vortex86DX Half-Size CPU Module with 512MB DDR2
RS-485
1
1 1 1
1 1
3.0
19.7
40.7
24.4
76.2
27.6
105.1
116.9
5.0
19.8 28.7
50.2
71.6
94.0
75.6 83.3
128.1
180.8
163.3
102.1
105.1
149.2
81.9
58.2
34.3
10.5
3.0
168.7
161.8
93.4
79.2
71.8
151.8
19.3
73.1
33.6
4.1
0.0
0.0
184.0
118.7
121.9
Ø3.2
Unit: mm
COM 4
COM 3
COM 2
RS-232/422/485
GPIO LCD Connector
Display type
Selection
Power
Connector
USB x 2
USB x 2
COM 1
LAN
VGA
PS2
KBD/Mouse
Flexible DC Power
Connector
FDD
PC/104
Power Connector
EIDE
Interface
JTAG
Parallel Port
Reset
Compact Flash
Type I/II
VDX-6324-FD