Impulse rBOX201-6COM - Manual

* All specifications and photos are subject to change without notice. 313
LED indicators (power, alarm,
ready/active, COM)
1 isolation DIO
(4-IN/4-OUT)
6 isolated COM
Din-rail kit
rBOX201-6COM
Robust Din-rail Fanless Embedded System
with AMD LX800 + CS5536AF, 6 Isolated
COM and 1 Isolated DIO (4-IN/4-OUT)
● Fanless and cableless design
● Supports AMD LX800 processor
● Wide temperature operation of -40°C ~ +70°C
● 1 isolated DIO (4-IN/4-OUT)
● 6 isolated COM ports
● 2 isolated 10/100Mbps Ethernet
● 2 watchdog timer
● LED indicators
● SNMP V1/V2c
● Supports 1 CompactFlash™
● 2 power paths with terminal block and 12-48VDC
● Supports AXView monitoring software package
Introduction
Specifications
rBOX201-6COM cost-effective din-rail fanless embedded system utilizes the low power
AMD LX800 processor and is designed to withstand temperatures ranging from -40°C to
+70°C for use in extreme operating environments.
To prevent ESD and over-voltage, this super compact-size rBOX201-6COM is equipped
with six isolated RS-232/422/485, two isolated 10/100Mbps Ethernet and one isolated
DIO port for offering magnetic isolation protection. Two power paths input minimizes
the risk of data loss in the event of a single power failure. IP30 housing, wide operating
temperature range and Safety/EMI/EMS compliance, rBOX201-6COM is ideal for
intelligent computing and communication solutions in critical environments such as
power utility, transportation and more. Besides, rBOX201-6COM is also specially
designed for remote control/ monitoring management applications like unmanned control
room, industrial machine, automatic parking lot, traffic cabinet and more.
The ready-to-run rBOX201-6COM equipped with AXView monitoring software is a
total solution for power plant automation, facility monitoring systems, intelligent
transportation systems, and more.
Standard Color Sliver-Black
Construction Extruded aluminum and heary-duty steel, IP30
CPU AMD LX800 processor
System Memory 1 x 200-pin DDR400 SO-DIMM max. up to 1 GB
System I/O Outlet Serial Port 6 x RS-232/422/485 (COM 1~6)
Interface select by software or BIOS
Supports Auto Flow Control in RS-485
mode
ESD protection 15 KV
Magnetic isolation protection 2KV
COM 1 & COM 2 speed up to 115.2kbps
COM 3 ~ COM 6 serial port speed up to
921.6kbps
LAN 2 x 10/100Mbps Ethernet
Magnetic isolation protection 1.5 KV
USB 2 x USB2.0
USB power distribution control by
software
System I/O Outlet DIO 1 x DIO (4-IN/4-OUT)
DI :
Input channels : 4, source type
Input voltage : 0 to 30VDC
Digital input levels for dry contacts :
-Logic level 0: close to GND
-Logic level 1: open
Digital input levels for wet contacts :
-Logic level 0: +10V to +24V (DI to COM-)
-Logic level 1: +3V max.
DO :
Output channels : 4, sink type
Output current: Max. 200 mA per
channel
On-state voltage : 24VDC nominal, open
collector to 30V
Optical isolation protection 3 KV
VGA 1 x DB15 connector
Power Input 2 x DC power input with terminal block
Alarm Contact One relay output with current 0.5A
@30VDC
Wireless 1 x Mini Card
(Full size, supports USB only)
1 x SIM card socket onboard
Supports 3G/GPRS
Watchdog Timer 2 WDT
WDT 1: one step is 1 sec, 255 levels
WDT 2: one step is 250ms, 255 levels
LEDs System Power, Alarm, Ready/Active, COM
(TXD, RXD)
Alarm DC PWR1 or PWR2 is lost (default)
User define event
Storage Supports 1 x CompactFlash™
Installation Din-rail, wall mount
Power Supply 2 power paths
Power Input Range 12 - 48VDC
Power Protection
DC Version:
OVP (over voltage protection)
UVP (under voltage protection) Reverse
protection
Features
Fanless Low Power UL508 IP30 Extended
Temperature
EN60950-1 Isolation Rear view
Front view
Wireless
(3G/GPRS)
AMD LX800
Processor