Impulse rBOX310-4COM - Manual

* All specifications and photos are subject to change without notice. 307
Din-rail kit
Wireless
(3G/GPRS or WiFi)
1 x SATA SSD (or HDD)
1 x CompactFlash™
1 x SIM slot
Audio
LED indicators
4 COM
rBOX310-4COM
Robust Din-rail Fanless Embedded System
with Intel ® Atom™ Processor N2800
1.86GHz, Intel ® NM10 Chipset, 4 COM,
SATA SSD, Audio and RTC ● Fanless and cableless design
● Supports Intel ® Atom™ processor N2800 1.86GHz
● Wide temperature operation of -40°C ~ +70°C
● 4 COM ports
● 2 isolated 10/100/1000Mbps Ethernet
● 2 watchdog timer
● RTC Battery function
● LED indicators
● 1 wireless (3G/GPRS or Wifi)
● SNMP V1/V2c
● Supports 1 x 2.5" SATA SSD (or HDD)
● Supports 1 CompactFlash™, 1 SD card (optional)
● 2 power paths with terminal block and 12-48VDC
● Supports AXView monitoring software package
Introduction
Specifications
rBOX310-4COM din-rail fanless embedded field controller supports extra low power
Intel ® Atom™ processors N2800 1.86GHz with extended temperature range of -40°C to
70°C for use in extreme operating environments.
To prevent ESD and over-voltage, this super compact-size rBOX310-4COM is equipped
with 4 RS-232/422/485, 2 isolated 10/100/1000Mbps Ethernet for rugged work
environment. Two power paths input minimize the risk of data loss in the event of a single
power failure. In addition, the RTC battery (battery onboard & gold-capacity onboard)
reduces maintenance efforts and is ideally suited to vibration environment. Powered
by IP30 housing, wide operating temperature range and Safety/EMI/EMS compliance,
rBOX310-4COM is ideal for intelligent computing and communication solutions in critical
environments such as power utility, transportation and more.
The ready-to-run rBOX310-4COM equipped with AXView monitoring software is a
total solution for power plant automation, facility monitoring systems, intelligent
transportation systems, and more.
Standard Color Sliver-Black
Construction Extruded aluminum and heary-duty steel, IP30
CPU Intel ® Atom™ processor N2800 1.86GHz
System Memory 1 x DDR3 SO-DIMM 800/1066MHz up to 4GB
System I/O Outlet Serial Port 4 x RS-232/422/485 (COM 1~4)
Interface select by software or BIOS
Supports Auto Flow Control in RS-485
mode
ESD protection 15 KV
COM 1 & COM 2 speed up to 115.2kbps
COM 3 ~ COM 4 serial port speed up to
921.6kbps
System I/O Outlet LAN 2 x 10/100/1000Mbps Ethernet
Magnetic isolation protection 1.5 KV
USB 2 x USB 2.0
USB power distribution control by
software
Audio 1 x Audio (Line-in/Line-out)
RTC Battery onboard &
Gold capacity onboard (1st backup
battery when power shut-down)
VGA 1 x DB15 connector
Power Input 2 x DC power input with terminal block
Alarm Contact One relay output with current 0.5A
@30VDC
Wireless 1 x Mini Card
- 3G/GPRS or Wifi
- Supports USB interface on 3G/GPRS or
supports PCIe interface on WiFi
1 x SIM socket (Easy-to-access)
Watchdog Timer 2 WDT
WDT 1: one step is 1 sec, 255 levels
WDT 2: one step is 250ms, 255 levels
LEDs System Power, Alarm, Ready/Active, COM
(TXD, RXD)
Alarm DC PWR1 or PWR2 is lost (default)
User define event
Storage Supports 1 x 2.5" SATA SSD or HDD
Supports 1 x CompactFlash™ (Easy-to-access)
Supports 1 x SD card up to 32 GB (optional)
Installation Din-rail, wall mount
Power Supply 2 power paths
Power Input Range 12-48VDC
Features
Extended
Temperature
Fanless Low Power EN60950-1 IP30 UL508 Isolation
Rear view Easy-to-access interface
Front view
Intel ® Atom™ processor
N2800 1.86GHz
SIM card socket
CompactFlash™ slot
NEW