Impulse PCM-3660 - Manual

8-9 All specifications are subject to change without notification. 8-9
I
ntroduction
Hardware and software compatible with Novell NE2000
10Mbps throughput
8/16-bit data bus (auto-sensing)
Remote Boot ROM socket for diskless operation
I/O : 300, 320, 340, or 360H
IRQ : 3,4,5,9,10,11,12, or 15
Boot ROM address: 0xC8000, 0xCC000, 0xD0000, or 0xD4000H
Built-in 10Base-T transceiver
AUI connector supports external transceiver (MAU) for 10Base-5 and
10Base-FOIRL (fiber optic)
Optional +5V only 10Base-2 external transceiver module (PCM-3661)
Single +5V power supply @ 400mA (max.) when external transceiver is
not used
Includes software drivers for ODI, NDIS, PC/TCP, PC-NFS, NCSA, LAN
manager, PATHWAY, WFW, and SCO UNIX
I
ntroduction
Four RS-232 ports with 10-pin connectors
16C550 UARTs with 16-byte FIFO
Speeds up to 115 Kbps
Choose address COM1 to COM4 or other user selectable I/O address
Individually selectable IRQ for each port (3 to 7, 9 to12, or 15)
Full RS-232 interface support (T x D, R x D, RTS, CTS, DTR, DSR, DCD, and
GND)
Power requirement : +5V@ 220mA (typical)
PCM-3640
PC/104 4-port RS-232 Module
PCM-3660
PC/104 Ethernet Module