Acer Altos R300 - Manual (Page 89)

75
Startup Sequence
The screen below appears when you select the Startup Sequence
parameter from the Start Options screen:
Parameter Description Option
First Startup
Device Sets the first device from which the
BIOS will attempt to boot up. Diskette Drive
CD-ROM
Hard Disk
Second
Startup Device Sets the device from which the system
will attempt to boot up when the first
attempt failed. CD-ROM
Hard Disk
Floppy
Third Startup
Device Sets the device from which the system
will attempt to boot up when the first
and second attempts failed. Hard Disk 0
Floppy
CD-ROM
Fourth Startup
Device Sets the device from which the system
will attempt to boot up when the
first, second and third attempts
failed. Disabled
Enabled
aa r300.book Page 75 Tuesday, March 11, 2003 9:42 AM