Acer Altos R300 - Manual (Page 58)

3 Upgrading your system 44
b Connect all cables (4, 5, 6, 7).
To install a floppy disk drive and hard disk drive assembly:
a Slide the floppy disk drive and hard disk assembly into the
housing (1, 2) then secure it with the screw removed earlier
(3).
b Connect all cables (4, 5, 6).
Note: Make sure that the other ends of the disk cables are
securely connected to their corresponding connectors on the
mainboard.
6 Replace the system cover.
aa r300.book Page 44 Tuesday, March 11, 2003 9:42 AM