Impulse EL332-IP - Manual (Page 2)

DFI reserves the right to change the specifi cations at any time prior to the product's release. Changes thereafter will be based on the product's revision.
Please contact your sales representative for the exact revision offered in your area. All product names mentioned are trademarks of their respective
companies. © December 28, 2012 DFI Inc.
www.dfi .com
Specifi cations
PROCESSOR
• LGA 775 socket for:
- Intel ® Core TM 2 Quad Q9400
- Intel ® Core TM 2 Duo E8400/E7400/E6400/E4300
- Intel ® Pentium ® E6500/E5300/E2160
- Intel ® Celeron ® E3400/E1500/440
• Supports Intel Enhanced Memory 64 Technology (EM64T)
• Supports Enhanced Intel SpeedStep Technology (EIST)
• 1333/1066/800MHz FSB
CHIPSET
• Intel ® chipset
- Intel ® G41 Express chipset
- Intel ® ICH7R I/O Controller Hub
SYSTEM MEMORY
• Two 240-pin DDR3 DIMM sockets
• Supports DDR3 800/1066MHz DIMM
• Maximum memory bandwidth of 17GB/s in dual-channel mode
when using DDR3 1066MHz
• Supports dual channel memory interface
• Supports up to 4GB system memory
• Supports unbuffered x8 and x16 DIMMs
EXPANSION SLOTS
• 1 PCI Express x16 slot (PCIE 1.1)
• 2 PCI Express x1 slots (PCIE 1.1)
• 1 PCI slot (PCI 2.3)
ONBOARD GRAPHICS FEATURES
• Integrated Intel ® GMA X4500
- Supports 3D, 2D and video capabilities, DX10 and OpenGL 1.5
• Display ports: DVI-I (Chrontel CH7307C) and VGA
ONBOARD AUDIO FEATURES
• Realtek ALC262 2-channel High Defi nition Audio
• DACs with 100dB SNR and ADCs with 90dB SNR
ONBOARD LAN FEATURES
• 4 Intel WG82574L PCI Express Gigabit Ethernet controllers
• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3u (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant
SERIAL ATA (SATA) INTERFACE
• SATA speed up to 3Gb/s (SATA 2.0)
• 9 Serial ATA interfaces compliant with SATA 1.0 specifi cation
- 4 SATA ports supported by Intel ICH7R
* Supports RAID 0/1/5/10
- 4 SATA ports supported by Silicon Image SiI3114 PCI to SATA controller
* PCI Local Bus Specifi cation Rev. 2.3 compliant
* APM Specifi cation Rev. 1.0 compliant
* PCI IDE Controller Specifi cation Rev. 1.0 compliant
* Supports RAID 0/1/10
- 1 SATA port supported by Genesys Logic GL830 USB to SATA
bridge controller
* USB Specifi cation Rev. 2.0 compliant
* USB Storage Class Specifi cation Rev. 1.0 compliant
IDE
• Supports up to two IDE devices
• Supports Ultra ATA 100/66/33
TRUSTED PLATFORM MODULE (TPM) - optional
• Provides a Trusted PC for secure transactions
• Provides software license protection, enforcement and password protection
BIOS
• AMI BIOS
- 8Mbit SPI BIOS
REAR PANEL I/O PORTS
• 2 DB-9 RS232/422/485 serial ports
• 1 DB-15 VGA port
• 1 DVI-I port (DVI-D signal)
• 4 RJ45 LAN ports
• 2 USB 2.0/1.1 ports
I/O CONNECTORS
• 2 connectors for 4 external USB 2.0/1.1 ports
• 2 connectors for 2 external RS232/422/485 serial ports
• 1 front audio connector for line-out and mic-in jacks
• 1 LAN LED connector
• 1 PS/2 connector for keyboard/mouse port
• 9 Serial ATA connectors
• 1 40-pin IDE connector
• 1 36-bit GPIO connector
• 1 24-pin ATX power connector
• 1 4-pin 12V power connector
• 1 chassis intrusion connector
• 1 front panel connector
• 3 fan connectors
ENERGY EFFICIENT DESIGN
• ACPI v3.0b specifi cation
• System Power Management
• Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-USB Keyboard/Mouse
- Wake-On-LAN
- RTC timer to power-on the system
• Microsoft ® /Intel ® APM 1.2 compliant
• AC power failure recovery
DAMAGE FREE INTELLIGENCE
• Monitors CPU/System/AUX temperature and overheat alarm
• Monitors CPU/DIMM/3.3V/5V/12V/1.1V/VBAT voltages and failure
alarm
• Monitors CPU/System/2nd fan speed and failure alarm
• Read back capability that displays temperature, voltage and fan speed
• Watchdog timer function
POWER CONSUMPTION
• 111.64 W with Intel ® Core TM 2 Quad Q9400 at 2.66GHz and 2x 2GB
DDR3 DIMM
TEMPERATURE
• 0 o C to 60 o C
HUMIDITY
• 10% to 90%
DIMENSIONS
• microATX form factor
• 244mm (9.6") x 244mm (9.6")
CERTIFICATION
• CE
• FCC Class B
• UL
• RoHS
EL332-IP
microATX
• USB port cable
• COM port cable
• Serial ATA data cable
• Serial ATA power cable
• I/O shield • 1 System board
• 2 USB cables
• 2 Serial ATA data cables
• 2 Serial ATA power cables
• 1 Bracket mounted with a COM port cable
• 1 I/O shield
• 1 DVD
• 1 QR (Quick Reference)
Packing List Optional Items