Controlled Products Systems Group RAM3200 - Manual (Page 25)

RAM 3000 • 3100 • 3200
www.ramsetinc.com 23
Ask your technician about all the features of our new Ramset operator.
Safety devices, such as reverse loops, phantom loops, photo eyes, or miller edges must be
installed on your gate before the operator may be used. Ask your technician which safety de-
vices best suit your safety needs.
Read your warranty certificate and fill out your warranty extension card. Return the warranty
card, via certified mail, to Ramset within 90 days of purchase:
Ramset Automatic Gate Services, Inc.
9116 De Garmo Ave.
Sun Valley, CA. 91352
Never let children operate or play with gate controls. Keep the controls away from children.
The entrance is for vehicles only. Pedestrians should use a separate entrance.
Always keep people, children and objects away from the gate while the gate is in operation. No
one should cross the area of a moving gate.
Use the emergency release only when the gate is not moving. Make sure when using the foot
release or hand crank, the circuit breaker for the operator is turned off.
Have the technician give you a demonstration of how to use the emergency release.
Keep gates properly maintained. Have a qualified gate technician service the gate operator
and gate hardware every six months to a year. This includes checking of safety devices, E.R.D.
and battery back up systems.
Warning signs must be placed on every gate in a highly visible area.
To reset the audible alarm on the gate operator you must turn the circuit breaker for the opera-
tor off for approximately 10 seconds, then back on. An exterior switch or button can also be
installed on the operator to shut off the audible alarm.
Always keep a good relationship with your technician and keep his or her number handy for
future maintenance or emergencies.
Important InformatIon for the homeowner
Opening the way…
ramset wishes to thank you for trusting us
to meet your gate operator needs