Controlled Products Systems Group RK65K - Manual (Page 7)

Radio Key ® RK-65K Operating Guide
Secura Key 4
PROGRAMMING RADIO KEY ® RK-65K
When the RK-65K is fi rst powered up, the LED will be fl ashing
Red and Green. Present a card to the unit to set the Facility
Code and the fl ashing will end in approximately 10 seconds.
Radio Key Transponders (Key tags and cards) are pre-encoded
and engraved at the factory with a Facility (Site) Code and an
individual card ID number.
You must teach the RK-65K which Facility Code or Codes
(up to 10) it should recognize. You must also enroll the card
ID numbers that will be Valid. The Radio Key
® cards and tags
are sequentially numbered, so you can validate a block of
transponders.
Be sure to make a record of each person who is issued a
transponder along with the ID number of their card or tag.