Exb system extender modules – CTI Products EXB-IP Ethernet System Extender User Manual
Page 4
EXB System Extender Modules
EXB 2005-08
MCN, EXB, EXB-IM, EXB-232, EXB-IP & EXB-FI are trademarks of CTI Products, Inc.
Other trademarks referenced are properties of their respective owners.
Specifications subject to change or improvement without notice.
General Specifications
EXB-IP Ethernet Unit
S1-60962 78 Kb/s
S1-60963 1.25 Mb/s
EXB-FI Fiber Unit
S1-61112 Multimode 78K
S1-61113 Single Mode1.25M
S1-61114 Multimode 78K
S1-61115 Single Mode1.25M
EXB-IM Integral Modem Unit
S1-60602 78 Kb/s
S1-60603 1.25 Mb/s
EXB-232 Serial Unit
S1-60655 78 Kb/s
S1-60656 1.25 Mb/s
Network
Transport
UDP/IP over 10Mbps
10Base-T Ethernet
UDP/IP over 10Mbps
10Base -FL Ethernet
n/a
n/a
IP Addressing
Modes
Unicast, Unicast-Replicated,
Multicast
Static IP Address is User
programmable
Unicast, Unicast -Replicated,
Multicast
Static IP Address is User
programmable
n/a
n/a
Ethernet
Media &
Connector
10Base-T (twisted pair),
RJ-45 connector, or
15-pin D-sub female
connector (AUI)
10Base -FI Duplex
Multimode, ST (2 km max), or
Single-Mode, ST (20 km max)
n/a
n/a
Power
10 to 30 VDC (10Base-T
only)
15 to 30 VDC (AUI)
6 watts max.
Requires separate power
supply (Does not use power
from MCN network.)
15 to 30 VDC
6 watts max.
Requires separate power
supply. (Does not use power
from MCN network.)
10 to 30 VDC
5 watts max. (Counts as 2
MCN standard loads)
10 to 30 VDC
5 watts max. (Counts as 2
MCN standard loads)
Modem
n/a
n/a
Internal V.32 terbo 19.2 Kbps,
2/4 wire leased line (switch
selectable)
n/a
Telephone
Line Levels
n/a
n/a
TX: -10 or -16 dBm (switch
selectable)
RX: -45 to -16 dBm
n/a
Telco
Approvals
n/a
n/a
FCC Part 68 (U.S.)
IC CS02 & CS03 (Canada)
n/a
Serial Ports
For Configuration only
For Configuration only
n/a
2 Asynchronous Serial
DE -9M DTE (PC-AT pinout)
Baud Rates
9600 – 33.6K
Controlled by configuration
program
9600 – 33.6K
Controlled by configuration
program
n/a
9600, 19.2K, 38.4K, 57.6K,
115.2K
Switch selectable per port
8 Data, 1 Stop, No Parity
(8N1)
Size
7.5" D x 5.6" W x 1.6" H (MCN “B” size module). Add 3.5” to depth of EXB-FI, due to fiber adapter.
Mounting
Desktop with integral non-slip feet. Optional mounting brackets available (See Below)
Environmental
0-60
C at 10-95% relative humidity, non-condensing
Listings
UL1950, CSA C22.2 No.950, EN60950
Carries the CE Mark
UL1459, CSA C22.2 No.225, EN60959, Carries the CE Mark
EMI
FCC part 15
Class B
Industry Canada (IC)
Class B
EN55022
Class B
FCC part 15
Class A
Industry Canada (IC)
Class A
EN55022
Class A
EMC
Complies with EN50082 -1, IEC 801-2, 3, 4
Mounting Kits
Model
Description
S2-60472
MCN 3B Rack Mount for EIA 19" racks, 1 Rack Unit (1.75") High
Mounts (3) EXB modules.
S2-60967
MCN 2A + B Rack Mount for EIA 19" racks, 1 Rack Unit (1.75") High
Mounts (1) EXB module and (2) size A MCN modules.