Pc client display overview, Local display, Receiver failure and error logging – CTI Products RCD Advanced Client-Server User Manual
Page 2: Multiple network interfaces, Complex system support, Client specifications, Advanced server specifications, Mcn™ advanced server

MCN™ Advanced Server
MCNRCD AS 2006-07
MCN, MCNRCD, CIB, AIB, TIB, IOB, EXB, EXB-IP and HIB-IP are trademarks of CTI Products, Inc.
Windows, Windows NT, 2000, XP are trademarks or registered trademarks of Microsoft. Other trademarks referenced are properties of their respective owners.
Specifications subject to change or improvement without notice.
CA-80724-102
MCN SERVER
IP LAN / WAN
MCN CLIENT PCs
MCN
HIB-IP
CIB
CIB
AIB
IOB
To Comparator
To Comparator
To Comparator
To Alarms Points & I/O
IP LAN / WAN
Network
MCN
CIB
CIB
IOB
To Comparator
To Comparator
To Alarms Points & I/O
Network
HIB-IP
MCN Advanced Client-Server System with HIB-IPs
PC Client Display Overview
The Client PC display features real-time status monitoring and
control of the modules on the MCN network. The client display
opens a display screen from the server and accepts status
updates from it.
Control functions such as Force-Vote or Disable for
comparators, Open for doors or Run/Stop for generators are
passed to the server for processing.
Local Display
The server software includes local display & control capability.
Receiver Failure and Error Logging
The MCNRCD Server software can log receiver failures and
other user-defined errors. The error log can aid in diagnosing
intermittent receivers or phone lines. Logging can be sent to:
• PC
Screen
• Disk
• Printer
Multiple Network Interfaces
The MCN Advanced Server can support multiple network
interfaces. It can connect to a local network using an internal
PCLTA card and remote networks using the external HIB-232
or HIB-IP network interface units.
Multiple remote comparator sites can be connected over an IP
infrastructure using multiple remote HIB-IP units.
Complex System Support
The MCN Advanced Server can work with the full range of
MCN modules. EXB Network Extenders can be used in
complex systems to link remote comparator or alarm sites via
analog lines, asynchronous serial channels, microwave, T1 /
E1, WAN IP or fiber networks.
Part Number
Network Interface Included
S1-61226
HIB-232 78K
(External via RS-232)
S1-61227
PCLTA 78K
(Internal PCI)
S1-61228
PCLTA 1250
(Internal PCI)
S1-61230
HIB-IP 78K
(External – via IP)
S1-61162
None - For use with external HIB-IP units.
Purchase HIB-IP units separately.
Client Specifications
Application type
Native 32 Bit Windows Application
Operating Systems
Windows 2000, XP
PC Requirements
(min.)
Pentium 4, 2GHz, 512 MB,
Appropriate IP network card
Advanced Server Specifications
Application type
Native 32 Bit Windows Application
Operating Systems
Windows 2000, XP, Server 2003
PC Requirements (min.)
Pentium 4, 2 GHz, 512 MB,
Open PCI slot for PCLTA
(MCN Network Card),
100Base-T NIC
MCN Networks Supported
Versions available for
78Kb (standard) or
1.25 Mb (high-speed)
Multiple Comparator Site
Support
Yes, with remote HIB-IP units over IP
channels;
or with EXB Network Extenders for
Analog lines, or Serial, Ethernet or
Fiber Channels
Clients Supported:
Base system: 4
Expandable to 64 with additional
Client Packs
Multiple Network Interface
Support software capability
Base system: 4
Expandable to 64 with additional
Network Interface Support Packs.
Purchase additional external Network
Interfaces as required.
Transport Protocol
UDP-IP Unicast and
UDP-IP Multicast
Number of receivers or I/O
blocks monitored
with 78k PCLTA:
128
with HIB-IP:
128 per HIB-IP
with 1250 PCLTA: 1024
System total:
5760 min.
Maximum receivers or I/O
points per window
Over 400, depending upon screen
resolution and length of names
Receiver Names, Channel
Titles & Display Grid
User Configurable
Status Messages
& Colors
User Configurable