English, 6 pc health status, Reset case open status – AMD GA-M61PM-S2 User Manual
Page 41: Case opened, Current system/cpu temperature, Current cpu/system fan speed (rpm), System/cpu warning temperature, Cpu fan fail warning, Cpu smart fan control
BIOS Setup
- 41 -
English
2-6
PC Health Status
Reset Case Open Status
Disabled
Don't reset case open status. (Default value)
Enabled
Clear case open status at next boot.
Case Opened
If the case is closed, Case Opened will show "No."
If the case is opened, Case Opened will show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change
to CMOS, and then your computer will restart.
Current Voltage(V) Vcore / DDR18V / +3.3V / +12V
Detect system's voltage status automatically.
Current System/CPU Temperature
Detect system/CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/system fan speed status automatically.
System/CPU Warning Temperature
60
o
C / 140
o
F
Monitor System/CPU temperature at 60
o
C / 140
o
F.
70
o
C / 158
o
F
Monitor System/CPU temperature at 70
o
C / 158
o
F.
80
o
C / 176
o
F
Monitor System/CPU temperature at 80
o
C / 176
o
F.
90
o
C / 194
o
F
Monitor System/CPU temperature at 90
o
C / 194
o
F.
Disabled
Disable this function. (Default value)
CPU FAN Fail Warning
Disabled
Disable CPU fan fail warning function. (Default value)
Enabled
Enable CPU fan fail warning function.
CPU Smart FAN Control
(Note)
Disabled
Disable this function.
Enabled
When this function is enabled, CPU fan will run at different speed depending
on CPU temperature. Users can adjust the fan speed with Easy Tune
based on their requirements. (Default value)
(Note) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
PC Health Status
Reset Case Open Status
[Disabled]
Case Opened
Yes
Vcore
OK
DDR18V
OK
+3.3V
OK
+12V
OK
Current System Temperature
32
o
C
Current CPU Temperature
45
o
C
Current CPU FAN Speed
3245 RPM
Current SYSTEM FAN Speed
0 RPM
System Warning Temperature
[Disabled]
CPU Warning Temperature
[Disabled]
CPU FAN Fail Warning
[Disabled]
CPU Smart FAN Control
[Enabled]
CPU Smart FAN Mode
[Auto]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level `
[Disabled]
Don’t reset case
open status
[Enabled]
Clear case open status
and set to be Disabled
at next boot